Instruction form

BEEPLY-NEW-8-mei-500px

How to use the Beeply

The Beeply needs to be worn around the neck with the use of a keycord. The Beeply gives buzz or auditive in combination with light (or only light) to alarm you and the people around you. Therefore you need to make sure clothes do not cover the Beeply. This way, the Beeply alarmsignal is visible and easy to hear for everyone in your surroundings. To optimize the operation of the Beeply, everyone present in the room must carry a Beeply.

How do I turn the Beeply on and off?
The Beeply contains one pressable button; this is the on/off button.

Power on press and hold the power button for 10 seconds. The activation of the
Beeply is accompanied by a beep and a flash of green light.

Power off press and hold the power button for 10 seconds. Turning off the Beeply is accompanied by a red light and a long beep.

RADIO-signal-3x

Alarm signal

If a Beeply is within the minimum recommended distance of 1.5 meters from another Beeply, an audible and visual signal will be emitted. This alarm will intensify as the Beeplys move closer together. The signal will stop when users are more than 1.5 meters apart.

The amount of steel present in a room possibly affects the operation of the Beeply. For example, a store with steel product shelves or a storage warehouse with steel racks. To ensure that the Beeply functions optimally in any environment, two different settings have been applied to the device.
Standard Mode suitable for open spaces such as open-plan offices
Sensitive mode suitable for areas such as shops or production areas

Change Mode
You can decide which of these two is suitable for the room you are in. When you press the on/off button once briefly, the mode will change. This is accompanied by a short beep and a blue light.

How do I charge the Beeply?

The Beeply has a 900mAh battery and lasts about 5 days, depending on the intensity of use. When the battery is almost empty, a continuous orange light signal is emitted.

The Beeply can be charged with a micro-USB-cable. You can plug this straight into a USB port of your computer or use an adapter and socket. The LED in the Beeply flashes green when it is charging. An empty battery is fully charged in approximetly 1.5 hours. When the battery is fully charged, you will see a continuous green light.

To clean

After use, clean the Beeply with a slightly damp cloth. Use a mild detergent or disinfectant for this. It is also recommended that each Beeply user uses their own keycord and not share it with others.

Warning:
NOTE: The signals may be affected by the Beeply user's body position and environmental factors.
NOTE: Beeply contributes to keeping the recomended distance of 1,5 meters. It does not protect against contamination.

Manufacturer

JK Retail Products
Middenweg 1
1432 DE  Aalsmeer
The Netherlands.